Enabling Do Not Disturb; Placing A Call On Hold - Polycom SoundPoint IP 335 User Manual

Enabling Do Not Disturb

Note

Placing a Call on Hold

Press and then select Features > Do not disturb to prevent the
phone from ringing on incoming calls. A flashing icon and text on the graphic
display indicates that Do Not Disturb is on.
Calls received while Do Not Disturb is enabled are logged in the Missed Calls
list unless configured to be forwarded to another party by your system
administrator.
To disable Do Not Disturb, press
not disturb again.
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.
Multiple Lines and Do Not Disturb
If multiple lines are configured on your phone, Do Not Disturb can be set on a
line-by-line basis from the list using
contact your system administrator. When Do Not Disturb is enabled for a
particular line, this is indicated by a flashing "X" beside the line indicator on
the display.
During a call, press
hold icon as the line indicator.
Press again or the Resume soft key to resume the call. The active audio
icon (one of ,
Using the Features of Your SoundPoint IP 335 Phone
and then select Features > Do
and
. This will be indicated on the graphic display by the
, or ) appears as the line indicator.
. For more information,
3 - 15