Using Call Queues (Call Queue Users Only); Assigning Speed Dial Keys - Polycom SoundPoint IP 670 User Manual

Using Call Queues (Call Queue Users Only)

Assigning Speed Dial Keys

Note
Phones on 8x8 Call Queues can log in and out of Call Queues if the Call Queue
Admin has granted log in/out permission to the user.
To enter or exit a Call Queue:
Press
1.
recently used Call Queue, you can select Apps Continue).
Select Call Queues > Log In All to enter all your Call Queues (or Log Out
2.
to exit your Call Queues).
If you are not a member of a Call Queue set up by your administrator, you will
get a message that you do not belong to any Call Queues.
You can associate contacts with Line Keys for single touch dialing of
frequently used numbers. Speed Dial entries are consecutively placed next to
assigned Line Keys on the phone. When a new entry is added to the Contact
Directory, it is automatically assigned the next available speed dial index and
the next available line key.
In the figure below, the phone has one line key, and three available speed dial
keys (assigned to Byron, Lauren, and Andrew). To dial Byron, Lauren, or
Andrew, press the associated line key.
To quickly access a list of speed dial index numbers, press the Up Arrow key from
the idle screen. To speed dial a contact, press the Up Arrow key followed by the
contact's speed dial index. For example, if Joan's speed dial index is 55, pressing
the Up Arrow key followed by 55 will place a call to Joan.
and select Applications > Home (or if you just
Using the Features of Your Phone
3 - 24