Installation; Unpacking; Connection - Doro 1000 Manual

Hide thumbs Also See for 1000:
Table of Contents

Advertisement

Unpacking

The package should include the following items:
- Handset
- Base unit
- 2 NiMH batteries
Model numbers +1 are also supplied with an extra handset, batteries, charger and electrical
mains adapter.

Connection

1. Connect the mains adapter* to the DC 9V socket on the base unit and to the
mains power wall socket.
2. Remove the battery cover from the back of the handset. Insert the batteries into
the handset ensuring correct battery polarity is observed. Replace the battery
cover.
3. Place the handset in the base unit, with the keypad facing up. When the handset
is correctly positioned the B indicator on the base unit will illuminate.
4. Charge the handset batteries without interruption for 24 hours initially
(thereafter fully discharged batteries will take 10 hours to recharge).
5. ONCE CHARGED, connect the telephone line cord to the Q socket on the
base unit and then to the telephone network wall socket.
6. A click will be heard when the modular plug is correctly connected.
Only for models with an extra handset (+1):
7. Connect the charger's mains adapter* to an electrical wall socket.
8. Remove the battery cover from the back of the handset. Insert the batteries into
the handset ensuring correct battery polarity is observed. Replace the battery
cover.
9. Charge the handset batteries without interruption for 24 hours initially
(thereafter fully discharged batteries will take 10 hours to recharge).
IMPORTANT!
Under power failure conditions this telephone will not operate. Please ensure that a separate
telephone not dependent on local power is available for emergency use. The handset may attract
small ferromagnetic objects, such as staples and pins, around the earpiece and the handsfree speaker,
care should be taken when placing the handset near such items. Do not place the base unit in areas
where it will be exposed to direct sunlight or other major heat sources.
*Use adapter Model S090050D31 only for the base unit and S060015D22 for the extra charger
(+1 only).
www.doro.com

Installation

- Mains adapter
- Line cord and adapter plug
- Instruction manual and guarantee card
English
5

Advertisement

Table of Contents
loading

Table of Contents