Installation; Connection; Language; Date/Time - Doro 430 Manual

Connection

1. Connect the mains adapter to the
electrical wall socket.
2. Carefully remove the handset battery cover. Insert the batteries into the handset
ensuring correct battery polarity is observed, and replace the battery cover.
3. Place the handset on the base unit with the keypad facing outwards. Once
the handset is correctly positioned on the base unit a beep will be heard.
Leave the handset to charge for 24 hours before using it for the first time.
4. Connect the line cord to the
telephone network wall socket.

Language

1. Press Menu.
2. Scroll to Handset Set using
3. Scroll to Language using
4. Scroll to required setting using

Date/Time

1. Press Menu.
2. Scroll to Base Set using
3. Scroll to Date/Time using
4. Set the date (DD.MM.YY) using the handset keypad. Press OK.
5. Set the time (HH:MM) using the handset keypad. Press OK to confirm.
Please note!
Only use with the supplied power adaptor/s.
Under power failure conditions the telephone will not work. Please ensure that a separate
telephone not dependant on local power is available for emergency use. The earpiece may attract
small ferromagnetic objects such as staples and pins, care should be taken when placing the
handset near these items.
Do not place the base unit close to other electrical equipment such as TV sets, computer screens,
telecom equipment, fans, etc. This will minimise the risk of interference. Do not place the base
unit in areas where it will be exposed to direct sunlight or other major heat sources!
The recharging system used in this model may result in the handset and the batteries becoming
warm. This is normal and will not damage the equipment.
Use original batteries only. The guarantee does not cover any damage caused by use of incorrect
batteries.
www.doro.com

Installation

socket on the base unit and to an
y
socket on the base unit and into the
T
∧ ∨
/ . Press OK.
∧ ∨
/
. Press OK.
∧ ∨
/ . Press OK to confirm.
∧ ∨
/ . Press OK.
∧ ∨
/
. Press OK.
English