Table of Contents
Advertisement
English
Outgoing Message (OGM)
The OGM is your message to the caller and may be up to 3 minutes in length.
If you choose not to record your own outgoing message, the caller will hear a
pre-recorded message in English.
There are two separate outgoing messages: OGM1 for the normal answering
function, and OGM2 for the Announcement Only function (when the caller
cannot leave any message).
An example of an outgoing message:
"Hello, we are sorry that we cannot take your call at this time, but please leave a
message after the tone, and we'll return your call as soon as we can. Thanks for
calling."
Select Answering Function
1. Make sure the answering machine is switched on.
2. Press
several times to choose between "Announcement One" (normal)
!
and "Announcement Two" (Please call later)
Recording an Outgoing Message
1. Select which of the two messages you want to record as above.
2. Press and hold
3. Record the outgoing message by speaking clearly towards the top of the base
unit from a distance of about 15-20 cm.
4. Stop the recording by pressing
5. The recorded message will be played back after a few seconds. Repeat this
procedure if you need to change the message. Any old outgoing message will
automatically be erased when a new one is recorded.
Checking the Outgoing Message
1. Select which of the two outgoing messages you want to listen to as above.
2. Press
.
8 8
The pre-recorded message will be heard when no other has been recorded. To go back to the pre-
recorded message press and hold C while the personal OGM is playing.
28
28
28
The answering machine
until you hear a short beep, then release the button.
8 8
.
g
www.doro.com
www.doro.com
Advertisement
Table of Contents
