Table of Contents
Advertisement
English
Unpacking
The package should include the following items:
- Handset
- Base unit
- Battery
The 8085+1 also include an additional handset and a charger with adapter.
Connection
1. Connect the mains adapter to the
electrical wall socket.
2. Remove the battery cover from the back of the handset. Insert the battery
plug and fit the battery into the handset. The battery cable should be placed
according to the image above. Replace the battery cover.
3. Place the handset in the base unit, with the keypad facing outwards. Once the
handset is correctly placed in the base unit, a beep will be heard and the
charge indicator
4. Charge the handset battery without interruption for 12 hours initially
(thereafter the charging will take up to 8 hours).
5. Connect the telephone line cord to the socket marked
and plug into the telephone network socket (using adapter plug if required).
Only for versions with an additional handset (8085+1)!
6. Connect the mains adapter to the charger and to an electrical wall socket.
7. Place the handset in the charger with keypad facing outwards.
IMPORTANT!
Under power failure conditions, this telephone will not operate. Please ensure that a separate
telephone, not dependent on local power, is available for emergency use.
The earpiece of the handset may attract small ferromagnetic objects such as staples and pins,
care should be taken when placing the handset near these items.
Do not place the base unit in areas of high humidity or where it will be exposed to direct
sunlight or other major heat sources.
4
Installation
y
will illuminate on the base unit.
7
- Mains adapter
- Line cord
- Belt clip
socket of the base unit and to an
t
on the base unit
www.doro.com
Advertisement
Table of Contents
