Australia And New Zealand - Doro 1000 Manual

The answering machine is not responding
- Memory may be full. Listen to your messages and erase them.
- Check that the unit is switched on
- Check that the telephone cable and the mains adapter are correctly
connected
Unable to remote access the answering machine
- Check that the telephone you are using to remotely control the answering
machine is a tone dialling telephone.
- Some telephones only emit a short tone beep when buttons are pressed,
and this may not be enough to activate remote control. Use a separate tone
transmitter or a different telephone in these cases.
- Also try holding the buttons down longer, approximately 1 second per digit.

Australia and New Zealand

Products permitted for connection to the telephone network are marked with
in Australia and
products comply with the regulations and can be used without concern in the
country of purchase.
If you believe this product is malfunctioning, please refer to the relevant section
and/or consult the troubleshooting guide in this manual to ensure that you have
followed the instructions carefully. As an alternative you can visit our web site
for FAQ's or send an e-mail for a prompt reply.
www.doro.com
Other
in New Zealand. These marks indicate the
English
35