Table of Contents
Advertisement
Day/Time stamp
The answering machine has a voice function that announces the day of the week
and the time when each message was recorded.
NOTE: The time stamp of the answering machine is independent of the handset time setting.
Setting Day/Time stamp
1. Press and hold H until you hear a short beep, then release the button.
2. "Please set day, Sunday" is announced.
3. Select the current day using
4. Select the hour using
5. Select the minutes using
Checking the Day/Time Stamp
Press H .
Number of rings
Setting the number of rings
You can select the number of rings (2-9, Toll saver*) before the answering
machine answers incoming calls.
1. Press and hold 2...9/TS button (on the underside of the base unit) until you
hear a short beep and "Please set rings, 6 rings" is announced, then release
the button.
2. Press the
8 8
of rings.
3. Press the 2...9/TS button again to set.
*The TS function (Toll Saver) answers calls after fi ve rings, until a new message has been
recorded, any subsequent calls will be answered after two rings. Once these messages have been
erased the cycle will be repeated. This is useful when remote accessing your unit; if there is no
answer after four rings, then there have been no new messages recorded and you can hang up
before you are charged for the call.
Checking the number of rings
Press 2...9/TS.
www.doro.com
The answering machine
8 8
or
8 8
9 9
8 8
or
button until the voice announces the required number
9 9
or
then press H to set.
9 9
then press H to set.
or
then press H to set.
9 9
English
29
Advertisement
Table of Contents
