Do not place the base unit in areas of high humidity of where it will be exposed to direct sunlight or other major heat sources. Only use with the supplied power adapter/s. www.doro.com...
To reduce the risk of possible interference please do not locate the base unit near any electrical equipment e.g. TV’s, computers, fridge’s, telecom equipment etc or close to radiators, metal pipes or window frames. Also ensure the base unit is not exposed to direct sunlight, excessive heat, damp or high humidity locations. www.doro.com...
When the telephone is installed for the first time, the battery pack must be charged for 24 hours before using the telephone. Use DORO original batteries only. The guarantee does not cover any damage caused by installing incorrect batteries. The handset is charged with the keypad facing outwards.
This function is used to help locate the handset or to page the person carrying the handset. The signal will stop automatically after a while or if the button on the handset is pressed. The page can also be cancelled by pressing the key on the base unit again. www.doro.com...
2. To deactivate the key lock press and hold N again until is no longer displayed. Calls can still be received, even if the key lock is active. When the call is finished, the handset returns to locked mode. www.doro.com...
3. Repeatedly press to delete the displayed number. 4. Enter the new telephone number to be stored. 5. Press to save. º Erasing ALL Stored Telephone Numbers 1. Press º 2. Press 3. Press 4. Press º www.doro.com...
The number is longer than the display size (>12 digits). End of list. Erasing Numbers 1. Repeatedly press until the required telephone number is displayed. 2. Press and hold until a beep is heard. Erasing All Numbers 1. Press º 2. Press 3. Press 5. 4. Press º www.doro.com...
º º Please Note! In order for the network voice mail to operate, you must subscribe to this service and/or have it activated by your network operator. Contact your operator for more information. www.doro.com...
4. Select the required setting by pressing the corresponding keypad digit 5. Press to confirm. º To turn the ringer off, in standby press and hold until is displayed. To turn the ringer on, again press and hold until is no longer displayed. www.doro.com...
5. Press to confirm. º Reset Handset Defaults You can reset most of the handsets functions and settings back to the original factory defaults. 1. Press º 2. Press 3. Enter the telephones PIN number (0000 when supplied). Press º www.doro.com...
3. When the call has been answered on the other handset press on the calling handset to transfer the call. If you decide not to transfer the call press and hold again on the calling handset to return to the external caller. www.doro.com...
If that phone works, then it is likely that the equipment is faulty. Proof of purchase such as the receipt or a copy of the invoice will be required for service or assistance if the above does not resolve the problem. www.doro.com...
9AM - 5PM Monday-Friday excluding Bank Holidays. Alterna- tively, E-mail on: tech@doro-uk.com You can contact us in writing: Consumer Support Group, Doro UK Ltd., 22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE, (regarding any Spares or Technical query), or Telephoning Spares: 01527 584377 Web site: www.doro-uk.com...
(As a matter of precaution, we recommend disconnecting the telephone during a thunderstorm). This guarantee does not affect your statutory rights. AUSTRALIA NEW ZEALAND DORO Australia Pty Ltd Atlas Gentech (NZ) Limited PO Box 6760 Private Bag 14927 Baulkham Hills BC NSW 2153...
If a charge for local calls is unacceptable, the “DIAL“ button should NOT be used for local calls. Only the 7 digits of the local number should be dialled from your telephone. DO NOT dial the area code digit or the “0“ prefix. www.doro.com...