Use From Base Unit; Outgoing Message - Doro COMFORT 1015 Manual

On/off from handset
1. Press . Select ANS. MACHINE. Press OK.
2. Select TAM ON/OFF. Press OK.
3. Select desired setting. Press OK.
If the handset's displays
switched on. If there are new messages, the indicator will flash whether the
answering machine is off or on.
Note!
Even when answering machine is OFF it will still answer after 10 rings, see
Remote access,

Use from base unit

The digits on base unit will flash when there are new messages.
Switch the answering machine on/off.
!
Start playback/Stop playback.
/
Skip to previous/Skip forward.
/
Delete current message.
X
To delete all old messages after playback: Press and hold X until
you hear a beep.
Increase/decrease volume.
Note!
If the base displays – – the answering machine is disconnected, or time/date is
not set. You need to set the date and time to gain full functionality.
On/off from base unit
Press 1 (on the base unit) to switch the answering machine on/off. If the base
unit's display is flashing/showing – – the answering machine is disconnected,
or time/date is not set.

Outgoing message

The outgoing message (max 3 minutes) is heard by incoming callers. There are
two separate outgoing messages, one for ANSWER ONLY (callers cannot leave a
message) and one for normal answering function ANS & REC. Please also select
desired answer mode ANSWER MODE , see
with a steady light the answering machine is
p.11.
English
Setup from handset, p. 7
9
/.