Table 26 Resolving An Error In The Aux1 Status Word - Novatel GPStation-6 User Manual

Troubleshooting
Bit Set
0-2
3
4-6
7
8-10
11-13
14-17
18
19-21
22-24
25-27
28-31
GPStation-6 User Manual Rev 2
Table 26: Resolving an Error in the AUX1 Status Word
None. This bit indicates that Position Averaging is ON
Reduce the amount of logging on the USB ports
AGC error on RF1 through RF4 respectively. To resolve, ensure antenna cable
is connected and signal input level is within specification.
Connect the receiver via Ethernet
Reduce the amount of logging on the Ethernet ports
Reduce the amount of logging on the NTRIP ports
Reduce the amount of logging on the Virtual COM ports
Action to Resolve
(Reserved bits)
(Reserved bits)
Connect the receiver via USB
(Reserved bits)
(Reserved bits)
86