•
Log ISMCALIBRATIONSTATUSA ONNEW (will be output each minute for calibration
duration)
•
Log ISMREDTECB ONNEW
•
Log ISMREDOBSB ONNEW
2.
Calibration offsets can be found in the last ISMCALIBRATIONSTATUS log, when the calibra-
tion period is complete.
Example:
#ISMCALIBRATIONSTATUSA,COM1,0,70.0,FINESTEERING,1704,39480.000,00800020,45d2,1
0832;18000, 5,
GPSL1CAL2Y,302,27.690591812,3.667247295
GLOL1CAL2P,131,26.807550430,4.445590496,
GPSL1CAL2C,63,21.765899658,0.235251412
GPSL1CAL5,63,10.893598557,0.282875121,
GLOL1CAL2CA,131,19.007484436,5.380369663*9c884ea9
Refer to the SELECTCHANCONFIG command described in the
erence
2.7.6
Apply Autocalibration Values to the Receiver
Use the following command to apply the results of the automatic calibration:
ISMTECCALIBRATION signal_combination calibration_value
Example:
ISMTECCALIBRATION GPSL1CAL2Y 27.690591812
ISMTECCALIBRATION GLOL1CAL2P 26.807550430
ISMTECCALIBRATION GPSL1CAL2C 21.765899658
ISMTECCALIBRATION GPSL1CAL5 10.893598557
ISMTECCALIBRATION GLOL1CAL2CA 19.007484436
2.8
Data Parsing Utilities
The GPStation-6 is provided with the following command line data parsing utilities which are used to
parse the GISTM logs and output CSV data in organized and human-readable format:
The input file accepted can be created using SLOG or NovAtel Connect.
The output file is a comma separated data file (*.csv).
27
manual for details on choosing satellite constellations and signals.
OEM6 Family Firmware Ref-
GPStation-6 User Manual Rev 2
Operation