Table 25 Resolving An Error In The Receiver Status Word - Novatel GPStation-6 User Manual

Troubleshooting
17
20
21
22
31
Bit Set
0
1
2
3
4
5
6
7
8
15
17
18
19
20
GPStation-6 User Manual Rev 2
Ensure that the version log is consistent with the hardware.
You may be exceeding the receiver's velocity limit. If so, reduce velocity. This
error can only be cleared by resetting the receiver.
Reload firmware using WinLoad or the SoftLoad commands.
Possible hardware failure. Contact Customer Support.
Table 25: Resolving an Error in the Receiver Status Word
Check the Error Word in the RXSTATUS log. See also Table 24, "Resolving a
Check temperature ranges in the ENVIRONMENTAL table sections of Technical
See Section 1.1.5, Power Supply Requirements, page 16.
Refer to the Time to First Fix and Satellite Acquisition descriptions in the Glossary
of Terms on our web site at
Check the CPU idle time. Check for unnecessary logging. Check for simultaneous
use of functionality, for example, API and RTK.
Check the serial port communication settings
Move the receiver away from any possible jamming sources. If still a problem
Move the receiver away from any possible jamming sources.
When the receiver has tracked GNSS satellites long enough for a valid almanac to
be received, this bit will be set to 0. Also, refer to the Time to First Fix and
Acquisition descriptions in the Glossary of Terms at
None. This bit only indicates if the receiver has calculated a position. Refer to the
Time to First Fix and Acquisition descriptions in the Glossary of Terms at
www.novatel.com
None. This bit is a status bit indicating if the receiver's position has been manually
fixed and does not represent a problem. Refer also to the FIX command in the
OEM6 Family Firmware Reference Manual.
Continued on the following page
SoftLoad is in progress.
Action to Resolve
Receiver Error Word," on page 83.
Specifications on page 73
www.novatel.com
Learning.
contact Customer Support.
Knowledge and Learning.
| Support | Knowledge and Learning.
through Support | Knowledge and
www.novatel.com
| Support |
84