Delete A Branch - Planet UMG-2000 User Manual

BRANCH
Operation mode: Displays the current operation mode
Connect to Headquarter: Displays the host/IP address of headquarter UMG-2000
Series.
Headquarter Location: Displays the location of the headquarter UMG-2000
Series.
Headquarter Serial Number: Displays the BTB serial number of the headquarter.
Headquarter Local Time: Displays the local time of the headquarter UMG-2000
Series.
Headquarter Call Prefix: Displays the call prefix of the headquarter UMG-2000
Series.
Location: the Displays the location of the UMG-2000 Series.
Serial Number: Displays the BTB serial number.
Link Status: Displays the link status of the UMG-2000 Series.
Key: Displays the key used to connect to the headquarter UMG-2000 Series.
Local Time: Displays the local time of the UMG-2000 Series.
Connection Time: Displays the total connection live time of the headquarter
UMG-2000 Series.
Call Prefix: Displays the call prefix of the UMG-2000 Series.

14.9 Delete a Branch

If the mode of your UMG-2000 Series is Headquarter, check the "Delete" check box in the
page "Overview" and then click the "Delete" button. The selected branch will then be
deleted.
Note:
Delete a branch will delete the entire branch configuration profile.
90