Table of Contents
Advertisement
2.1.8 The Hard Disk Installation
The SATA subsystem supports four hot-swappable hard drives. The SATA drives are
inserted to the SATA backplane that provides power and bus termination.
Note:
1. Please install at least one 80G HDD to the No.1 disk carrier before system configurations.
2. If with single HDD, please select RAID level to JBOD.
Locate the storage subassembly.
Press the
disk carrier switch to unlock the carrier.
Unplug the disk carrier by pulling the carrier handler.
Mount the disk into the carrier and load the fixing screws.
Press the
disk carrier switch to
Close the disk carrier lock/switch to lock the carrier.
insert the carrier to the disk slot.
21
Advertisement
Table of Contents
