End Of Cooking Programmer - AEG COMPETENCE 5005 Operating Instructions Manual

• Ensure that large splashes of oil or melted grease do not fall on the oven
base when placing or removing dishes from the oven cavity; This could cau-
se unpleasant smells or smoke when the oven is next used, or even result in
a fire if these substances are overheated.
• Never line any part of the oven with aluminium foil. It would result in an
accumulation of heat which might damage the cooking results and also
damage the enamel.
• Always insert the dripping pan when using the grill or when cooking meat
on the grid. Pour a little water into the dripping pan to avoid grease burning
and creating unpleasant smells.
• Always use oven gloves to remove dishes from the oven.
• The accessories (grid and dripping pan) should be washed before using for
the first time.

End Of Cooking Programmer

This device allows you to have the oven
switch off automatically after a timed
period.
Manual Function
You can manually operate the electric
oven, i.e. without any programming.
Turn the Programmer knob clockwise on the symbol
Setting the Programmer
The End of Cooking Programmer can be set on a maximum cooking
time of 120 minutes.
Place food into the oven, and set the Oven Function Control Knob on
the required temperature.
Turn the Programmer knob clockwise until the maximum setting, then
turn it back to the required cooking time.
At the end of the timed period, an acoustic alarm will sound and the
oven will switch off automatically.
Nevetheless, we recommend you to turn the Oven Function Control
knob on the "0" position, and the Programmer knob on
12
.
.