Ignition Of Hob Burners; The Hob Lid - AEG COMPETENCE 5005 Operating Instructions Manual

Ignition of Hob Burners

• To facilitate ignition, light the burners before placing pans on the
grid. After having lit the burners check that the flame is regular.
To ignite a burner, approach the burner with a flame, push the
corresponding knob in completely and turn it anticlockwise to the
maximum position; upon ignition regulate the flame as required.
If after a few attempts the burner
does not ignite, check that the
burner cap and crown are correctly
positioned.
To switch off the burner, turn the
knob clockwise to the position " ".
During cooking, when using fats or
oils, take particular care as they can
ignite when overheated.
• Always lower the flame or turn it
off before removing the pan.

The Hob Lid

• The appliance is provided with a glass lid. Its function is to protect
the surface from dust when closed and to accumulate splashes of
grease when open.Do not use for other purposes.
• Always clean the lid before closing.
• Allow the burners to cool down before closing the lid, as it could
splinter if overheated.
• The glass lid is removable for easier cleaning.
Cap
Crown
7