Electronic Programmer - AEG 37699MO-MN User Manual

= Bottom heating element and fan on
= Rear heating element and fan on
= Grill heating element on
= Grill heating element and fan on
fig.4
Oven thermostat knob
By turning the oven knob clockwise we
will find the different oven temperature
values (from 50°C to max).
I
50
75
100
125
150
fig.5
Red warning light
If present, when lit, it indicates that an
electric component is inserted
Yellow warning light
When lit it indicates that the oven or the
grill is in use. During cooking time the
led turns off each time the temperature
set is reached. It is therefore common
that the led/yellow light turns on and off
several times according to re-heating
process.
0
I
(fig.5)
Max
225
200
175

Electronic programmer

M
A
U
T
O
The programmer can select the following
functions:
- Clock
2-3
- Minute counter
1
2
- Cooking time
- End of cooking
3
- Manual operation mode
4
- Setting time backwards
5
- Setting time forward
6
The digital display (N) always shows the
time and can display cooking and end
of cooking time or the minute counter
time by pressing the corresponding push
button.
N.B.: At the end of each setting
session (except for the minute counter)
the programmer turns the oven off.
Check when next using the oven, if
the programmer is not going to be
used, that the latter is set on manual
operation (see the instructions given
further on).
Setting the time (from 0.01 to 24.00 =
hh,mm)
After connecting to the electricity mains
or subsequent to a power cut, AUTO and
"0.00" will both flash simultaneously on
the display.
Press push buttons 2 and 3
simultaneously and start setting the
current time by pressing push button 5
or 6.
Once set the AUTO symbol will turn
off and the
symbol, for manual
operation, will turn on.
ENGLISH 7
N