Brother FAX-T96 User Manual page 149

3
Take the used ribbon out of the cartridge:
1 Unclip the upper white spool and slide the roll off the blue gear.
(Do not remove the blue gear)
2 Lift out the lower roll.
Blue
Gear
White Gear
4
Slide the white elastic off the new refill rolls and set them down
with the full roll in the lower position. (The ribbon's shiny side is
facing down.)
5
Remove the white gear and spools from the ends of the used
cardboard cores. Then insert them into the same positions in the
new cores.
White Gear
TROUBLESHOOTING AND ROUTINE MAINTENANCE 13 - 11
Used Ribbon
Upper White Spool
Cartridge
Lower White Spool
White Spool