Changing the TX Lock System Password
1
Menu/Set
Press
2
Press
or
SET PASSWORD .
3
Menu/Set
Press
The screen prompts you to enter the
old password.
4
Enter the current password.
5
Menu/Set
Press
The screen prompts you to enter the
old password.
6
Enter a 4-digit number as a new password.
7
Menu/Set
Press
The screen prompts you to re-enter
the new password.
8
Enter the new password again and press
9
Stop/Exit
Press
Switching TX Lock System ON
1
Menu/Set
Press
2
Press
or
SET TX LOCK .
3
Menu/Set
Press
prompts you to enter the password.
4
Enter a 4-digit password, followed
Menu/Set
by
This is the same as the security password of your machine
already stored.
The screen displays ACCEPTED for 2 seconds, followed by
TX LOCK MODE - TX Lock System is now switched ON.
If the password you enter at Step 4 is incorrect, the screen
would display WRONG PASSWORD . After 2 seconds the display
will then return to select menu for Function 0. You must then
start from Step 1 to set TX Lock System.
6 - 22 SETUP SEND
0
1
,
,
.
to choose
.
.
.
.
0
1
,
,
.
to choose
. The screen
.
SET TX LOCK
SET PASSWORD
OLD PASSWD:----
ENTER & SET
NEW PASSWD:----
ENTER & SET
VERIFY:----
ENTER & SET
Menu/Set
.
SET TX LOCK
SET PASSWORD
PASSWORD:----
ENTER & SET