Using TX Lock System
You must use a password to switch TX Lock System ON and OFF.
Setting Up the TX Lock System for the First Time
1
Menu/Set
Press
The screen prompts you to enter the
password, and then press
Menu/Set
2
Enter a 4-digit number as a new password.
3
Menu/Set
Press
The screen prompts you to re-enter
the password.
4
Re-enter the password and press
5
The screen displays.
6
Press
or
LOCK .
7
Menu/Set
Press
prompts you to enter the password.
8
Enter a 4-digit password, followed
Menu/Set
by
This is the same as the password of the machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by
TX LOCK MODE - TX Lock System is now switched ON.
If the password you enter at Step 8 is incorrect, the screen
would display WRONG PASSWORD . After 2 seconds the display
will then return to select menu for Function 0. You must then try
again to switch TX Lock System ON.
0
1
,
,
.
.
.
to choose SET TX
. The screen
.
NEW PASSWD:----
ENTER & SET
VERIFY:----
ENTER & SET
Menu/Set
.
SET TX LOCK
SET PASSWORD
PASSWORD:----
ENTER & SET
SETUP SEND 6 - 21