Out Of Memory Message; Broadcasting - Brother FAX-T96 User Manual

Out of memory message

If you get an OUT OF MEMORY message while scanning the first page
Stop/Exit
of a fax, press
MEMORY message while scanning a subsequent page, you will have
the option to press
Stop/Exit
to press
Depending on your typical faxes, OUT OF MEMORY errors can
occur frequently. If this happens, change the Memory
Transmission setting back to OFF .

Broadcasting

Using the numbers you have stored in Groups, One-Touch and
Speed-Dial memory, you can "Broadcast" faxes automatically to a
maximum of 104 different locations in a few simple steps.
After the Broadcast is completed, a Broadcast Report will be printed
automatically to let you know the results.
1
Insert the document face down in the ADF.
2
Menu/Set
Press
3
To change the default setting, press
Menu/Set
Press
4
Enter the One-Touch and Speed-Dial numbers (one after the
other), Search numbers or a Group number you have stored.
5
Fax Start
Press
memory, and then transmits it to all the numbers you entered. If
the line is busy, your machine will redial.
Stop/Exit
Press
Broadcast.
To cancel all locations, press
scheduled job on page 6-8.)
to cancel the scan. If you get an OUT OF
Fax Start
to send the pages scanned so far, or
to cancel the operation.
3 9
, , .
.
. The fax machine stores the document in
during transmission to cancel the current fax
Menu/Set
or to select ON .
4
, . (See Cancelling a
SETUP SEND 6 - 19