Hot Water System - BRAVILOR BONAMAT B5HW Operating Instructions Manual

8.3

Hot water system

Symptom:
1. Water too cold / hot.
2. Water boils continuously.
3. The water system does not
warm up.
4. The hot water system
warms up very slowly.
ECopyright Bravilor Bonamat B.V.
LIST OF MALFUNCTIONS
Possible cause:
Water temperature set too low /
high.
Due to extreme weather
conditions the air pressure can
change, making the water boil
quicker.
Temperature sensor defect.
Boiling dry safety device
applied.
An element is defective.
Actions:
Set the water temperature
again, see § 7.3.6.1.
Remark: The maximum water
temperature is 3_ below the
boiling point. In the maximum
temperature range the water
starts boiling every 10 minutes.
This option is no longer
applicable when the setting is
lowered.
Call in service.
Call in service.
Call in service.
Call in service.
version 1.0
43