Table of Contents
Advertisement
1.1
Water system calibration
In this menu the water system can be calibrated.
With calibration the volume of the water is determined for a defined flow and time.
When finished the measured volume must be filled in.
► The water system calibration is used to adjust the differences between the actual water delivery
of the Sprso and the indicated amount.
Necessities:
• measuring container (with fine scale)
1.1a
1.1b
1.1c
Water system calibration:
• go to the program menu
• press and hold the button combination
5 seconds
Calibration water system:
• press start to confirm
Step 1: preparation
• make sure that you have all necessities
• press > to go to the next step
and
for
3
Advertisement
Table of Contents
