7.3.2
Selected units: litres,
cups, jugs or US gallon
The machine is default set to the unit L (= litres).
This unit can be changed. (This unit is default on
the display with the preference keys (fig.33 )).
– A selection can be made from the following
units: Litre = L, Gallon = GL (3.7853 L), Jug,
or Cup (fig.31 ).
– The selected is also used for further settings,
except with the total counters.
G
H
I
J
K
L
M
Fig. 31 Units to be selected
D Press programming key (I.).
– The L of litres starts flashing on the display.
– This is the default setting (fig.32 ).
D Press the selection key (M.)⇓ or (N.)⇑ until the
symbol for the desired unit flashes on the
display: cup, jug, GL (= US Gallon) or
L (= litre).
– The enter symbol ↵ appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
– The symbol for the desired unit stops
flashing and the other symbols disappear.
G
H
I
J
K
L
M
Fig. 32 The default set unit = L (litres)
28
version
1.0
D Selected unit:
litre , go to § 7.3.2.1
tap, go to § 7.3.3
jug, go to § 7.3.4
US gallon, go to § 7.3.5.
7.3.2.1
G
H
I
J
Fig. 33 Default pre–selection keys
D Press selection key (N.)⇑, until fig.33 appears
N
on the display.
– The default pre–selectionof keys (G.–J.) can
D Press the pre–selectionkey to be changed (G.,
H., I. or J.).
D Press selection key (M.)⇓ or (N.)⇑ to select the
desired amount (table 5 ).
– The enter symbol ↵ appears on the display.
– Repeat these two previous steps to change
D Press the confirmation key (L.) to confirm the
adjustment.
D Press selection key (N.)⇑ to go to the next
setting (§ 7.3.6.1) or press stop key (K.) to exit
the programming menu.
B5HW
B10HW
B20HW
Table 5 Default settings
N
Changing pre–programmed
selection keys G–J (Litres)
K
L
M
N
now be adjusted.
other pre–selectionkeys if necessary.
1−3−4−5 litres
2,5−5−7,5−10 litres
5−10−15−20 litres
ECopyright Bravilor Bonamat B.V.
1−5 litres
2−10 litres
4−20 litres