Modules 4 And 8 (Hot Water/Steam); Introduction; General Description; Main Components - BRAVILOR BONAMAT RLX Operating Instructions Manual

1.

MODULES 4 AND 8 (HOT WATER/STEAM)

1.1

Introduction

In this document, the specific information for
the above–mentioned module is discussed.
Please also thoroughly read the general user
instructions.
1.1.1

General description

These modules are designed for the preparation
of hot water and steam. The water is heated and
the boiler is brought up to pressure as soon as
the module is switched on using the ON/OFF
switch. The water is drawn off using the
hot–water draw–off tap. Drinks may be heated up
by steam, using the steam–draw–off tap.
1.1.2

Main components

1
2
3
4
5
Fig. 1 Main components hot–water/steam modules
1. ON/OFF switch
2. operating panel
3. steam tap
4. hot–water tap
5. outlet safety valve
ECopyright Bravilor Bonamat B.V.
1.2
D See table 1 for additional technical information
about the steam modules.
Boiler capacity
hourly capacity
water reserve
overpressure (steam pressure)
Table 1 Technical information
1.3
1.3.1
1. Switch on the module.
– The module will first take water to the
maximum level, after which the pressure is
brought up to 0.6 bar.
2. Drain off the water using the hot water
1
2
draw–off tap.
After this, the steam module is ready for use.
1.4
1.4.1
D
C
Fig. 2 Control panel hot–water/steam modules
A. descaling indication
Will flash to show that the machine needs to
be descaled.
B. [–] button
Push button to change the values during
programming.
C. [+] button
Push button to change the values during
programming.
D. Display
Displays the overpressure.

Technical data

Modules 4 and 8
22,5 litre
24,6 litre
21,6 litre
20,6 bar

First use

Flushing

Daily use

Controls

A
B
version
1
1.0