7.3.3
Cup contents
The contents of a cup can be set, as not all cups
are of the same size.
– The setting range is between 50 and 200ml
and can be adjusted by steps of 5ml.
– The default setting for a cup is 125ml.
G
H
I
J
K
L
M
Fig. 34 Cup contents
D Press selection key (N.)⇑ until fig.34 appears
on the display.
D Press programming key (J.).
– The position beside the programming key
starts flashing.
D Press selection key (M.)⇓ or (N.)⇑ to select the
desired amount.
– The enter symbol ↵ appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
ECopyright Bravilor Bonamat B.V.
7.3.3.1
The machine calculates itself the number of cups
of the default pre–selectionkeys, in relation to the
preferred settings of litres divided by the content
of the cup. These default pre–selectionkeys can
be adjusted as desired.
G
H
I
J
N
Fig. 35 Adjusting pre–programmed selection keys
D Press selection key (N.)⇑ until fig.35 appears
on the display.
– The default pre–selectionof keys (G.–J.) can
D Press the pre–selectionkey to be changed (G.,
H., I. or J.).
D Press selection key (M.)⇓ or (N.)⇑ to select the
desired amount (table 6 ).
– The enter symbol ↵ appears on the display.
– Repeat these two previous steps to change
– When cup contents other than 125ml have
D Press confirmation key (L.) to confirm the
adjustment.
D Press selection key (N.)⇑ to go to the next
setting (§ 7.3.6.1) or press stop key (K.) to exit
the programming menu.
B5HW
B10HW
B20HW
Table 6 Default pre–selection keys for cups
Adjusting pre–programmed
selection keys G–J (Cups)
K
L
M
for cups
now be adjusted.
other pre–selectionkeys if necessary.
been selected, the values of the
pre–selectionkeys will also differ from the
values given in table 6 .
8, 24, 32, 40 cups
20, 40, 60, 80 cups
40, 80, 120, 160 cups
version
N
8−40 cups
20−80 cups
40−160 cups
29
1.0