Fig. 15 Waiting Mode Timer - BRAVILOR BONAMAT B5HW Operating Instructions Manual

The selection is made as follows:
D Press keys (M.
)⇓
and (N.)
and hold them down.
– The current day and time appear for a
moment on the display (fig.13 ).
– Subsequently, the next pre–programmed
time setting appears on the display (fig.14 ).
TIP
– When in the extended programming menu,
§ 7.3.8, no time settings have been
programmed, the current day and time remain
visible on the display.
D Press key (M.
)⇓
and (N.)
pre–programmed setting if necessary.
D The default setting is OFF. If the set values are
good, then press key (H.), OFF is changed into
ON.
– An enter symbol appears ↵ on the display.
The clock in the display starts flashing and
the system will make coffee at the set time.
The waiting mode appears on the display
(fig.15 ).
D Now press the confirmation key (L.) to confirm.
– The clock in the display starts flashing and
the system will make coffee at the set time.
The waiting mode appears on the display
(fig.15 ).
TIP
– If the settings are not good, they can be
changed once–only (§ 7.1.2).
D In the waiting mode the current day and time
can be viewed. Press the selection keys (M.
⇑
and (N.) simultaneously and hold them down
for about 2 seconds.
D The current day and time appear on the
display (fig.13 ).
ECopyright Bravilor Bonamat B.V.
⇑
simultaneously
⇑
to select another
)⇓
G
H
I
J
K L M

Fig. 15 Waiting mode timer

TIP
– The selected time setting has been protected
against termination between times. However,
the setting can be cancelled. This can be
done as follows:
D Press stop key (K.) and keep it down for
about 5 seconds.
– The protection is cancelled now.
Coffee can be made again in the normal way.
N
17
version 1.0