Operating The Oven - Electrolux EKC60752 User Manual

14 electrolux
The display shows
later shows the setting again.
is shown again if attempts are made to
change set values when the cooking
zone area is locked.
2. To remove the function lock again, press
"Function lock"
second.

Operating the oven

It is normal for steam and condensation to
form on the oven door. This condensation is
from the food being cooked and does not in-
fluence safety or oven function.
The oven is fitted with removable shelf steps
with five levels
Practical use
Warning! Never place aluminium foil, a
roasting pan or a shelf directly on the
bottom of the oven. If the bottom heater
is blocked, the enamel can be damaged
by over-heating.
The oven becomes hot when used, keep
an eye on children.
The principle of hot air
An annular heating element round the fan
heats up the air, which is then spread
through the air channels in the oven rear wall
Oven functions
Hot air
Conventional
~ 1 sec.
during locking and
again for about one
Application
For roasting and baking on differ-
ent levels at the same time. Set
the oven temperatures 20-40 °C
lower than when using Conven-
tional heating.
For baking and roasting on one
oven level.
The symbol goes out and the earlier
heating setting is shown again.
If the hob is switched off, the function lock
is automatically disengaged.
by the fan. The hot air circulates in the oven
before it is once again sucked in through the
fan grille. Heat is transferred quickly and ef-
fectively, and this generally means that you
can use a lower oven temperature than with
upper and lower heating. Lower the temper-
ature by 15- 20% if the recipe says that you
should use a temperature of between 160
and 225°C. The higher the temperature, the
greater the decrease. At temperatures over
225°C it is better to use upper and lower
heating.
The oven functions
For all functions, the yellow control lamp on
the control panel lights up during heating and
goes out when the temperature has been
reached (it lights up and goes out when the
thermostat switches on and off).
Heating element/ fan
Annular element and fan
Top heating element and bottom
heating element (starts with Auto-
matic quickstart, Hot air and bot-
tom heat, which becomes top/
bottom heating when the selec-
ted temperature is reached)
~ 1 sec.