Using The Oven - Electrolux EVEP916 Installation & User Manual

USING THE OVEN

Operating your oven temperature and function
selectors model (EFE914)
To set the oven, turn the function selector to the desired
cooking function and then turn the temperature selector
to the desired temperature. An indicator light above the
temperature selector will come on. When the temperature
is reached the heating source switches itself off and the
indicator light goes out. When the oven temperature falls
below the desired setting, the heating source switches
on and the indicator light comes on again.
Once the food is cooked, turn the temperature selector off
in an anti-clockwise direction. Do not force it right round
in a clockwise direction as this will result in damage to the
thermostat. Turn the multifunction selector off.
Operating your programmable controller model
(EVEP916, EFEP916, EFEP956)
Turning the oven on
• Switch on the oven by touching the
symbol. The LCD control panel will come on and
inform you that you need to select a cooking function.
• If you do not select a function within 20 seconds the
oven will turn off.
Select a cooking function
Your oven will have a selection of functions. Press the
function or function
necessary until the desired function appears.
Cooking suggestions will appear under the function name
and suggested cooking temperatures will appear above
the temperature selector.
If no other symbol is touched within 8 seconds the
oven will switch on and begin to heat up to the
displayed temperature.
ON/OFF
symbols as many times as
Selecting a temperature
The temperature is electronically controlled.
The temperature can be selected within the range of 30ºC
to 250ºC and can be adjusted at any time. To set the
temperature, press the temperature
symbols to reach the desired setting.
Press OK, or if no further changes are made within
8 seconds the oven begins to heat up to the set
temperature. The current oven temperature will appear
above set temperature.
When the temperature is reached, "Set temperature
reached" will appear, only the target temperature will
be displayed.
Turning the oven off
Touch the 'ON/OFF' symbol to switch off the oven.
IMPORTANT!
Pre-heating
Pre-heating your oven is recommended in several cooking
and grilling functions. Pre-heating your appliance allows it
to reach the required temperature quickly and efficiently as
well as cook your food at the correct temperature for the
entire cook time.
Programmable controller
(EVEP916, EFEP916, EFEP956)
These models are equipped with a built-in rapid heat-up
that activates each time you start an oven function. During
the rapid heat-up phase the heat comes from the element
surrounding the fan as well as the grill elements above
13
and temperature