Operating Instructions And Start-Up Procedures - Electrolux SP New R452a Operator's Manual

10. OPERATING INSTRUCTIONS AND
START-UP PROCEDURES
!IMPORTANT!
BEFORE STARTING THE MACHINE, CARRY OUT
THE CLEANING AND SANITISING PROCEDURES
DESCRIBED IN CHAPTER 9.
- Dilute and mix the product in a separate
container according to the manufacturer's
instructions (see fig.23).
NOTE: "mix" is the result of the blending
between water or milk with the powder to
make slushes, sorbets, frozen creams ice
milk, frozen yogurt and similar frozen dairy
products.
ATTENTION: in order to avoid any damage
to the appliance, it is recommended not to
start the machine in freezing mode with
less than 1.5 litres of product in the tank.
- Pour the mix obtained into the bowl (see
fig.24).
- Restore the secondary cover and then the
main one.
Note -----------------------------------------------
SP units are equipped with a very efficient
safety mechanism designed to protect the
operator; it is activated when cover is lifted.
This device automatically and immediately stops
all moving parts.
If the main cover is not correctly
positioned, the correspondent mixing
system will not work.
------------------------------------------------------
- Adjust the consistency to the desired level by
turning the wheel located on the back of the
machine (fig. 25); by turning clockwise to the
left, the level indicator will move towards the -
sign and the product will become less dense, by
turning counter clockwise to the right, the level
indicator will move towards the + sign and the
product will become denser.
Edition: October, 2023
Fig. 23
Fig. 24
Fig. 25
Revision: 0 Pag.: 17/28