Zoom X7N User Manual page 51

The following table describes the settings on the WAN
Configuration pages and the values that you can enter. The
settings displayed on the page will vary according to the protocol
you are using.
Setting
Protocol
Encapsulation
VPI
VCI
PPP User Name
PPP Password
ATM Traffic Class
Description
Your Internet Service Provider supplies
this value.
If your service provider instructs you to
use 1483 Bridged mode, select 1483
Bridged + NAT to take advantage of
your modem's advanced routing and
firewall features.
The encapsulation value should match
your DSL provider's encapsulation. The
value refers to the way that data is
passed over the Internet. An example
value is LLC (Logical Link Control).
Your DSL provider supplies this value
when you sign up for ADSL service.
Virtual Path Identifier ranges from 0 –
256. Your DSL provider supplies the
VPI when you sign up for ADSL
service.
Virtual Circuit Identifier ranges from 0
– 65536. Your DSL provider supplies
the VCI when you sign up for ADSL
service.
Your DSL provider supplies this PPP
User Name when you sign up for ADSL
service.
Your DSL provider supplies this PPP
password when you sign up for ADSL
service.
These settings allow you to give priority
to data that is sent over the network.
Important! You must make
arrangements with your DSL provider
51