Wireless Mac Filtering - Zoom X7N User Manual

To setup a Wireless Guest Network:
1. Click on Wireless from the left-side menu to take you to
the Wireless Basic Setup page.
2. Click the Enabled check box to enable the Guest wireless
network.
3. Enter a name for your guest network in the SSID field.
TIP: You may want to include the word guest in the name so
users know it is a guest network. For example, MyCompany
Guest
The table explains the following settings for your Wireless
Guest Network:
This setting... Lets you specify...
Hidden Click in the check box if you do not want to
broadcast the SSID of your network.
Isolate Clients Enabling client isolation will prevent wireless
clients on the same network from
communicating with each other. Typically this
feature would be used on a guest network..
Disable WMM WMM is used to give wireless data different
Advertise levels of priority. You can disable WMM to
give all users equal priority.
Enable WMF Allows you to enable Wireless Multicast
Forwarding (WMF). Most users should leave
this disabled.
Max Clients Up to 16 wireless clients are allowed on each
network.
BSSID Reports the wireless MAC Address

Wireless MAC Filtering

Most users will not need this feature. However, if there is a PC or
other device on the X7N network that you don't want using the
Internet, you can use MAC address filtering to deny the device
Internet access. (That computer or device will still be able to
communicate with other devices on the LAN, such as printers.)
39