Zoom X7N User Manual page 48

Outgoing: To block selected IP traffic by
Security
IP Filtering setting up filters.
Incoming: To accept selected IP traffic by
setting up filters (when the firewall is enabled).
Allows you to block access to the Internet
Security
based on a device's MAC address.
MAC
Filtering
Parental Allows control of when certain computers or
Control devices are allowed to access the Internet.
Time
Restriction
Parental To choose particular URLs to be excluded or
included by setting up a URL list. A maximum
Control
of 100 entries can be configured.
URL
Filtering
QoS This lets you assure better performance for
(Quality of gaming and VoIP.
Service)
Queue Management Configuration: Allows
you to automatically mark incoming traffic
without reference to a particular classifier.
Queue Configuration: Allows you to
configure a maximum of 24 entries.
QoS Class: Allows you to configure network
traffic classes.
Routing Default Gateway: Set up the routes on which
you want the X7N to send data that it receives
on a particular interface, such as a LAN or
Ethernet interface.
Static Route: Routes specify the IP address of
the next device, interface, or Internet
destination to forward data to, based on the
ultimate destination of the data. A maximum
of 32 routes can be configured.
RIP: Sets the X7N to use Routing
Information Protocol (RIP). Most users will
not set this.
Chapter 8: Advanced X7N Setup Options X7N User Manual