Remote Access To Your Modem Configuration Settings68 - Zoom X7N User Manual

you can do so in one of two ways: You can perform a software
reset or a hard reset.
To reset using the X7N's Web interface
If you can open your Web browser and access your X7N's
Configuration Manager, do the following to perform a software
reset:
1
Log into the Zoom Configuration Manager. (See page 14 if
you need help logging in.)
2
Click on the Management link on the left pane of the
window. Then click on the Settings link. Then click on the
Restore Default link.
3
Click the Restore Default Settings button.
To perform a hard reset
If you lose your link to the unit and cannot communicate with it
via the Web browser, do the following to perform a hard reset:
Press the RESET button on the modem's back panel for seven
seconds.
You are now guaranteed that all system settings are restored to the
X7N's factory defaults.
Remote Access to Your Modem
Configuration Settings
If you want to be able to access your modem Configuration
Manager to change or view your configuration settings remotely:
1
Click on Management. Click on Access Control, then click
on Services and select the enable check box for Http WAN
to allow access from a remote PC. Click Save/Apply and wait
several seconds for the settings to be saved.
2
Click on Status from the left pane of the Zoom
Configuration Manager. Click on WAN. Write down the
public IP address displayed under WAN Info.
Chapter 9: Management and Diagnostics X7N User Manual