Viewing The Advanced Setup Options - Zoom X7N User Manual

Viewing the Advanced Setup
Options
For Advanced Setup options, click Advanced Setup from the
left-side menu of the Zoom Configuration Manager.
This link... Opens a page that lets you...
ATM Used to set up multiple ATM channels. Most
Interface users will only do this if instructed by their
service provider.
WAN Specify how the Wide Area Network (WAN)
ADSL setup is configured. Some of the values
need to be supplied by your ISP/DSL
provider.
LAN Specify the settings that control the
connection between the X7N modem and
your computer. Set a fixed IP address for your
computer.
IPv6
Allows you to set up IPv6 parameters.
Autoconfig
NAT Virtual Servers Setup page: To direct
incoming traffic from the WAN side. A
maximum of 32 entries can be configured.
Port Triggering: To dynamically open up
ports in the firewall when an application on
the LAN initiates a TCP/UDP connection to
the remote application using a 'Triggering
Port'. A maximum of 32 entries can be
configured.
DMZ Host: To forward IP packets from the
WAN that do not belong to any of the
applications configured in the Virtual Servers
table to the DMZ host computer.
47