Handle Installation
1.
Install the handle assembly on the generator upper frame using the
12 mm washers, spring washers and handle holder bolts.
TORQUE:
17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
HANDLE HOLDER BOLT (2)
Operation must be checked after attaching the handle.
Check that the handle can be folded smoothly.
Check that the handle does not hang down by its own weight.
To extend handle:
Raise the handle to the horizontal position. The handle will click into
place when locked.
HANDLE ASSEMBLY
HANDLE
SPRING WASHER (2)
12 mm WASHER (2)
HANDLE LEVER
ASSEMBLY
83