ASSEMBLY
Handle Installation
Install the handle assembly on the generator upper frame using the
12 mm washers, spring washers and handle holder bolts.
TORQUE:
17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
−
−
−
HANDLE HOLDER BOLT (2)
SPRING WASHER (2)
12 mm WASHER (2)
HANDLE ASSEMBLY
Operation must be checked after attaching a handle.
To extend handle:
Raise the handle to the horizontal position. The handle will click into
place when locked.
HANDLE LOCK LEVER
HANDLE
84