Wheel Kit Installation - Honda EB10000 Owner's Manual

ASSEMBLY

Wheel Kit Installation

1. Install the two wheels on the axle shaft using the plain washers and
split pins.
2. Install the axle assembly on the generator using four 8
flange bolts.
3.
Install the two stands on the under frame using two 8
flange bolts, two 8
TORQUE: 17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
8 16 mm
FLANGE BOLT (2)
COLLAR (2)
STAND (2)
82
45 mm flange bolts, and two collars.
AXLE SHAFT
WHEEL (2)
16 mm
16 mm
8 16 mm
FLANGE BOLT (4)
8 45 mm
FLANGE BOLT (2)
4.0 28 mm
SPLIT PIN (2)
20 mm
PLAIN WASHER (2)