Handle Installation - Honda EB10000 Owner's Manual

ASSEMBLY

Handle Installation

Install the handle assembly on the generator upper frame using the 12 mm
washers, spring washers and handle holder bolts.
Torque: 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m)
SPRING WASHER (2)
HANDLE HOLDER BOLT (2)
12 mm WASHER (2)
HANDLE ASSEMBLY
TO EXTEND HANDLE:
Raise the handle to the horizontal position. The handle will click into place when
locked.
Pressing down on the handles may damage the handle holder assembly. Only pull
up on the handles to move the generator.
HANDLE LEVER
HANDLE
14