SERVICING YOUR GENERATOR
2.
Remove the 4 mm self-tapping screw, and remove the spark arrester.
3.
Use a brush to remove carbon deposits from the spark arrester
screen.
Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and tears. Replace the
spark arrester if it is damaged.
4.
Install the spark arrester in the reverse order of removal.
TORQUE:
1.6 lbf·ft (2.2 N·m , 0.22 kgf·m)
5.
Install the muffler protector in the reverse order of removal.
54
4 mm SELF-TAPPING SCREW
SPARK ARRESTER