Handle Installation - Honda EB4000X Owner's Manual

ASSEMBLY

Handle Installation

1. Install the handle folder assembly on the generator upper frame
using the 8
2. Install the handle assembly on the generator upper frame pipe using
the 8 16 mm flange bolts, handle bush A, handle bush B, and
handle lower bracket.
TORQUE: 17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
HANDLE ASSEMBLY
HANDLE BUSH A (2)
HANDLE BUSH B (2)
HANDLE LOWER BRACKET (2)
Operation must be checked after attaching the handle.
Check that the handle can be folded smoothly.
Check that the handle does not hang down by its own weight.
To extend handle:
Raise the handle to the horizontal position. The handle will click into
place when locked.
HANDLE
78
18 mm flange bolts.
8 16 mm FLANGE BOLT (8)
8 18 mm FLANGE BOLT (2)
HANDLE FOLDER ASSEMBLY
FRAME PIPE
HANDLE LOCK LEVER