Setting The Display Color Of The Pop-Up For Each Aprs Packet - Yaesu FTM-400DR Instruction Manual

Setting the display color of the pop-up for each APRS packet

This sets the display color of the pop-up for each APRS packet.
• Since the beacon may be matched to multiple conditions, the packets will be checked
in the following priority order and lighted up in the first corresponding color specified.
MY PACKET > CALL RINGER > RNG RINGER > MOBILE > OBJ/ITEM > BEACON
• The conditional matching of the beacon concerned will not be determined for items that
are set to OFF. For this reason, the color does not change even if the conditions match.
When none of the conditions match, the display color of the pop-up will not change
and will be displayed in white.
1
Press for one second or longer
2
Select and touch [APRS]
3
Select and touch [8 APRS POP-UP]
The screen for setting the display color of the pop-up
will be displayed.
• 1 BEACON: When all the APRS beacon stations
are received, the pop-up will be
displayed in the specified color.
• 2 MOBILE: When an APRS mobile station is
received, the pop-up will be displayed in
the specified color.
• 3 OBJECT/ITEM: When an APRS object/item station is received, the pop-up will be
• 4 CALL RINGER: When a call sign ringer specified station (a station registered in
• 5 RNG RINGER: A pop-up will be displayed in the specified color when a message
• 6 MESSAGE: When a message is received, the pop-up will be displayed in the
• 7 GRP/BULT: When a group message or a bulletin message is received, the pop-
• 8 MY PACKET: When a transmission beacon of your own station (relayed signal)
displayed in the specified color.
APRS RINGER (CALL) is received, the pop-up will be displayed
in the specified color.
Even when the CALL RINGER of the APRS RINGER is set to
OFF, the pop-up will be displayed in the specified color when it is
set to anything other than OFF here.
is received from a nearby station of the range ringer (when there
is a station closer than the set distance of the RNG RINGER of
the APRS RINGER).
No station will be a detection target when the RNG RINGER of
the APRS RINGER is set to OFF.
specified color.
up will be displayed in the specified color.
(effective only when MYPACKET in APRS POPUP is set to ON) is
received, the pop-up will be displayed in the specified color.
Using the APRS Set-up Menu
73