Intellian i9P User Manual page 57

Parameter Setting - To set antenna parameter values.
Scan Offset
The scan offset is to offset the angle difference between the
black marker on the sub-reflector and the optical sensor.
Track Scale
The track scale is to control the tracking speed while antenna
is tracking the satellite.
Detect Level The detect level is to set the satellite signal detection level.
WRS Level The WRS level is to set the WRS detection level.
Track Offset The tracking offset is to offset the satellite signal tracking
level.
Power Level
The power level is to distinguish the voltage between 13 V and 18 V.
DiSEqC Level
The DiSEqC level is to distinguish 0KHz tone and 22KHz tone.
Offset RH-LH
The offset RH-LH is to offset the signal difference between
RHCP and LHCP.
EL Offset The EL offset is to offset the angle difference between the
mechanical elevation angle and actual elevation angle.
Use WRS Use WRS is to determine whether the system uses WRS level
or not. "Use WRS" and "WRS Level" are pair functions.
Offset Offset difference is to determine whether the system to uses
Difference "Offset RH-LH" or not. "Offset Difference" and "Offset RH-LH"
are pair functions.
57