Intellian i9P User Manual page 50

Intellian Satellite TV Antenna Systems
Setting Satellite Information
Figure 25 : Setup Satellite Information
50
Satellite Information
•
The name, longitude, signal polarity, LNB local frequency and signal
verification method of the satellite are displayed when a satellite is
selected in the list box. Push "Edit Satellite Information" button to
update the information on modifying the value.
DiSEqC
•
When the operation method of DiSEqC is selected to "Change
Band",DiSEqC may be used for updating the local frequency and to
"Change Satellite", for updating the target satellite.
Registration of target satellite
•
In case that Tri-sat Mode is selected and the DiSEqC is selected to
"Not Use, only u"Register for Sat A", "Register for Sat B" and w
"Register for Sat C" may be registered. Pushing u or  or
wbutton after selecting the satellite in the list box makes it
possible to register A or B or C.
Local Frequency
•
In case that DiSEqC is selected to "Change Band", be sure to push
the "Universal LNB" button. In case that the DiSEqC is selected
to "Not Use" or "Change Satellite", be sure to push "Single Band"
button and key in into the Local Frequency, and then push " Set
Local Frequency" button.