Operation Using Pc Controller Program Introduction; Operation Using Pc Controller Program - Intellian i9P User Manual

Operation Using PC Controller Program

Introduction
PC Software of Intellian i9P has been created for the user to easily set up the antenna by using personal computer.
The program enables the user to easily monitor and modify the information of antenna, satellite and GPS. Additionally,
detailed diagnostic methods of the antenna are provided by the PC program.
To start this program,
1. Connect one end of PC serial cable to the serial port on the computer.
2. Connect the other end of the PC serial cable to the "PC Interface" on the rear of ACU.
3. Execute program by inserting the CD-ROM into the computer.
Figure 18 : Intellian Antenna PC Controller Program
45