Configuring Xerox Secure Access Login Settings; Setting Up Authentication For A Usb Smartcard Reader System - Xerox D95 System Administration Manual

• Install the appropriate plug-in for your card reader and printer model. Download the
latest plug-in files and plug-in installation instructions at www.xerox.com.
1. In CentreWare Internet Services, click Properties > Security > Authentication
Configuration.
2. On the Authentication Configuration page, next to Login Type, select Xerox Secure
Access.
3. Select Enabled next to Print Stored File from Folder, or Enabled next to Folder to
PC/Server to enable these services.
4. Select Enabled next to Non-account Print to allow users without accounts to access
the printer.
5. Click Apply, then click Reboot Machine.
6. After the printer restarts, refresh your browser and navigate to the Authentication
Configuration > Step 1of 2 page, and click Next at the bottom of the page.
7. Next to Authentication System, click Configure.
8. On the Authentication System page select Authentication Agent from the
drop-down list.
9. Type the Server Response Time-Out, and the Search Time-Out.
10. Select Enabled next to Assign UPN (User Principal Name) if desired.
11. Click Apply to accept the changes or Undo to retain the previous settings.
12. Click Reboot Machine.

Configuring Xerox Secure Access Login Settings

1. In CentreWare Internet Services, click Properties > Security > Remote
Authentication Servers Xerox Secure Access Settings.
2. Type the Default Prompt text and Default Title text.
3. Select Enabled next to Local Login to allow users to type their credentials at the
control panel.
4. Select Enabled next to Get Accounting Code to allow the printer to get the user s
accounting code from a network accounting server when the user logs in at the control
panel. Network authentication and network accounting must be configured. If this
setting is not enabled, the user must enter an accounting code when they log from
the control panel.
5. Type a number from 1 through 300 for the Connection Time-Out.
6. Click Apply to accept the changes or Undo to retain the previous settings.

Setting up Authentication for a USB Smartcard Reader System

To use the printer with a card reader system other than Xerox Secure Access, you must
order and install the Xerox Common Access Card Enablement Kit. The kit includes
hardware, software, and instructions for connecting and configuring your card reader
system. Before you begin:
• Install a Kerberos authentication server and configure with user accounts
Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide
Using the Scan Service
5-7