Secure Http And Ssl/Tls; Configuring Secure Http And Ssl/Tls Settings - Xerox D95 System Administration Manual

Using CentreWare Internet Services for Accounting and Authentication / Security

Secure HTTP and SSL/TLS

You can encrypt all data sent over HTTP by establishing an encrypted SSL connection.
You can enable SSL encryption for the following services:
• Configuring the printer in CentreWare IS
• Printing from CentreWare IS
• Printing using IPP
• Managing scan templates
• Network scanning
• Network accounting
Before you begin:
• Install a digital certificate.
• Ensure that the date and time configured on the printer is correct. This is used to set
the start time for self signed certificates.

Configuring Secure HTTP and SSL/TLS Settings

• A digital certificate must be installed on the printer before you can enable Secure
HTTP. For details, see Installing a Digital Certificate.
• If Secure HTTP is enabled, to access CentreWare IS, all pages will contain https:// in
the URL for the Web page.
1. In CentreWare IS, click Properties > Security > SSL/TLS Settings.
2. Next to HTTP - SSL/TLS Communication, select Enabled.
3. Type the port number you want to use for HTTP SSL/TLS.
4. If you want to use SSL/TLS for LDAP communication, select Enabled next to LDAP -
SSL/TLS Communication.
5. If you want to use S/MIME communication, select Enabled next to S/MIME - SSL/TLS
Communication.
6. If you want to use SSL/TLS for SMTP communication, next to SMTP - SSL/TLS
Communication, select a method that your server supports.
Note
If you are unsure what method your server supports, select STARTTLS (if available).
If you select STARTTLS (if available), the printer attempts to use STARTTLS. If your
server does not support STARTTLS, SMTP communication is not encrypted.
7. Select Enabled next to Verify Remote Server Certificate if necessary.
8. Click Apply to accept the changes or Undo to retain the previous settings.
Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide
13-19