Memory Full Procedure; Maximum Stored Pages; Saturation; Background Suppression Level - Xerox D95 System Administration Manual

System Settings
4. Repeat steps for the remaining Other Settings items.
5. From the Other Settings screen, select Close to return to the Service Settings screen.

Memory Full Procedure

Select either Delete Job or Run Job as the default setting. This default setting appears
while scanning an original if there is insufficient hard disk space for the scanner. If an
insufficient amount of hard disk space is determined, a confirmation screen appears
asking how the partially stored data should be handled (cancel job or run job).
• Delete Job: The stored data is discarded.
• Run Job: The partially stored data is treated as valid and complete, the job is run.
If the user does not respond to the confirmation screen and a predetermined amount
of time elapses, the machine automatically processes the partially-stored data according
to the default setting selected here.

Maximum Stored Pages

Select the maximum number of stored pages of a scan original. Select a number from
1 through 999 pages.

Saturation

Select Pastel +2, Pastel +1, Normal, Vivid +1, or Vivid +2.

Background Suppression Level

Select the amount of background suppression for scanned data. Select from Higher +1,
Higher +2, Normal, Lower -1, or Lower -2.

Shadow Suppression Level

Select Higher +2, Higher +1, Normal, Vivid +1, or Vivid +2.

TIFF Format

Select the TIFF format for scanned data. Select either TIFF V6 or TTN2.

Image Transfer Screen

Select whether or not to display a message when the scan process completes.
• Disabled: Do not show message.
• Display Message at End of Scanning: Show scan completion message.
10-64 Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide