Brother ADS-1000W User Manual page 240

Appendix
Status
USB cable is
not connected
(Scan to PC)
Network
Disconnected
(Scan to Net
Device 1/Net
Device 2)
Front Cover is
Open
Document Jam
Plastic Card
Jam
Top Cover is
Open
Plastic Card
Inserted
Too Many Files
on USB (Scan
to USB)
Descriptions
Press and then do
one of the following:
 Scan to PC
Connect the machine and
your computer with
a USB cable.
 Scan to Net Device 1/Net
Device 2
Check the following and
then try again.
• The WLAN is enabled.
• The network settings
are correct.
• Your wireless access
point/router is turned on.
Close the Front Cover of the
machine.
Clear the document jam. See
Document Jam on page 197.
Pull the plastic card out from
the machine.
Close the Top Cover. Do not
open the Top Cover while a
plastic card is inserted into the
Card Slot.
Pull the plastic card out from
the machine. Do not insert a
plastic card into the Card Slot
while the Top Cover is open.
Your machine cannot save to a
USB flash drive if it contains too
many files. Disconnect the USB
flash drive, press ,
delete unused files or folders
from the root folder of the USB
flash drive and then try again.
B
226